EN
EN - 73
Possible causes:
Type of glass or manufacturing process. Chemical composition of detergent.
•
Water temperature and duration of dishwasher programme.
•
Suggested remedy:
Use glassware or porcelain dishes that have been marked di shwasher-proof by the
•
manufacturer
•
Use a mild detergent that is described as kind of dishes If necessary, seek further information
•
from detergent manufacturers.
Select a program me with as low a temperature.
•
To prevent damage, take glass and cutlery out of the di shwasher as soon as po ssible after
•
the programme has ended.
At the End of the Wash Cycle
When the working cycle has finished, the buzzer of dishwasher will mooing 8 seconds, then
stop. Turn of the appliance using the ON/OFF button, shut off the water supply and open the
door of the dishwasher. Wait a few minutes before unloading the dishwasher to avoid handling
the dishes and utensils while they are still hot and more susceptible to breakage. They will also
dry better.
6. STARTINg A WASHINg PROgRAMME
Wash cycle table
Program
Cycle Selection
Information
Description of
Cycle
Deter
-
gent
pre/main
Run
-
ning
time
(min)
Ener
-
gy
(kWh)
Water
(l)
Rin
-
se
Aid
Auto
For all soiled
loads, such as
pots,pans,casserole
dishes and dishes
that have been
sitting with dried
food on them for a
while.
Pre-wash (40°C)
Autowash (50–
60°C)
Rinse
Rinse (70°C)
Drying
3in1
(or4/20g)
150
0.8~1.2 9~12
-
Strong
For the heaviest soi
-
led loads, such as
pots,pans,casserole
dishes and dishes
that have been sit
-
ting with dried food
on them for a while.
Pre-wash (50°C)
Pre-wash
Wash (60°C)
Rinse
Rinse
Rinse(70°C)
Drying
4/20 g.
164
1.35
17.5
-
Summary of Contents for DFA 847 DW7
Page 88: ......
