EN
EN - 82
Start of dishwasher
•
The followings should be checked before starting the dishwasher.
Whether the dishwasher is level and fixed
1)
Whether the inlet valve is opened
2)
Whether there is leakage at the connections of the conducts
3)
Whether the wires are tightly connected
4)
Whether the power is switched on
5)
Whether the inlet and drain hoses are knotted
6)
All packing materials and printings should be taken out from the dishwasher
7)
Attention
•
After installation, please put this manual into the bags of printings. The content of this manual is
very helpful to the users.
9. TROBLESHOOTINg TIPS
Before Calling for Service
Review the charts on the following pages may make you be free of calling for service.
Problem
Possible causes
What to do
Dishwasher
doesn´t run
Fuse blown, or the circuit breaker
acted
Replace fuse or reset circuit breaker.
Remove any other appliances sharing
the same circuit with the dishwasher.
Power supply is not turned on
Make sure the dishwasher is turned on
and the door is closed securely.
Make sure the power cord is properly
plugged into the wall socket.
Water pressure is low
Check that the water supply is con
-
nected properly and the water is tur
-
ned on.
Noise
Some audible sounds are normal Sound from soft food shredding action
and detergent cup opening.
Utensils are not secure in the
baskets or something small has
dropped into the basket
To ensure everything is secured in the
dishwasher.
Motor hums
Dishwasher has not been used regu
-
larly. If you do not use it often, remem
-
ber to set it to fill and pump out every
week, which will help keep the seal
moist.
Summary of Contents for DFA 847 DW7
Page 88: ......