Goddess WFE1015M8, Instruction Manual

Page: 4 / 24

ENG
ENG - 4
SECTION 2: INSTALLATION
You must pay attention to the following issues before using your washing machine.
REMOVAL OF TRANSPORTATION SCREWS
Transportation screws, which are located at the back side of the machine, must be removed
before running the machine.
Loosen the screws by rotating counterclockwise by a suitable wrench. (DIAGRAM-1)
Remove the screws by pulling them. (DIAGRAM-)
To the holes where the transport screws have been removed, insert the plastic transport
screw taps found in the accessories bag. (DIAGRAM-3)
The transportation screws, that have been removed from the machine should be kept in hand
for any other transportation necessities.
ADJUSTMENT OF FEET
Do not install your machine on rugs or similar surfaces.
For your machine to work silently and without any vibration, it should be settled on a flat,
non-slippery and tough ground.
You can adjust the balance of your machine from its feet.
First, loosen the plastic adjustment nut.
Adjust by rotating the feet upwards or downwards.
After the balance has been reached, tighten the plastic adjustment nut again by rotating it
upwards.
Never put cartons, wooden blocks or similar materials under the machine to balance the irre-
gularities on the level of the ground.
•
•
•
•
•
•
•
•
•
•
•
•