Goddess WFE1015M8, Instruction Manual

Page: 14 / 24

ENG
ENG - 14
Remove the water inlet hose.
Remove the filters found on the water inlet valves by using a pincer and wash thoroughly
with a brush.
Clean the filters of the water inlet hoses located on the tap side by removing manually
together with the seal.
After you clean the filters, you can fit them the same way as you have removed.
PUMP FILTER
The pump filter system elongates the life of your pump, which is used to drain the dirty water.
It prevents lint to enter the pump. Cleaning of your pump filter in every -3 months
is recommended. To clean your pump filter:
Open the kickplate’s cover, by pulling the handle.
Before opening the filter cover,place a cup in front of the filter cover to prevent flow of the
remaining water in the machine.
Loosen the filter cover by rotating it counter clockwise and drain the water.
Remove the foreign materials from the filter.
Check for the rotation of the pump manually.
After you have cleaned the pump, fit the filter cover by rotating clockwise.
Put the kickplate cover into the place.
Do not forget that if you do not fit in the filter cover properly, it will leak water.
WARNING!
Danger of being scalded!
Since the water inside the pump maybe hot, wait for it to cool.
•
•
•
•
•
•
•
•
•
•
•
•