EN
EN - 68
Fill in detergent
Fill the detergent dispenser with detergent.
The marki ng indicates the dosing levels, as illustrated on right:
A)
The place of main wash cycle detergent placed, “MIN”means approximately 20 g
of detergen.
B)
The place of pre-wash cycle detergent placed, approximately 5 g of detergent
• Please observe the manufact urers dosing and storage recommendations as stated
on the detergent packaging.
• Close the lid and press until it locks in place.
• If the dishes are heavily soiled, place an additional detergent dose in the pre-wash detergent
chamber. This detergent will take effect during the pre-wash phase.
NOTE:
You f ind information about the amount of detergent for the single programmes on the last page.
Please aware, that according to the level soiling and the specific hardness of water differences
are possible.
Please observe the manufact urer‘s recommendations on the detergent packaging.
Detergents
There are 3 sorts of detergents
1)
With phosphate and with chlorine
2)
With phosphate and without chlorine
3)
Without phosphate and without chloride
Normally new pulverised detergent is without phosphate. The water softener function
of phosphate is not given. In this case we recommend to fill salt in the salt con tainer even when
the hardness of water is only 6 dH. If detergents without phosphate were used in case of hard
water often white spots appear at dishes and glasses. In this case please ad d more detergent
to reach better results. Detergent s wit hout chlorine do only bleach a little. Strong and coloured
spots will not removed completely. In this case please choose a programme with higher
temperature.
Summary of Contents for DFB 1266 MW8
Page 85: ...Pozn mky Notes...
Page 86: ...Pozn mky Notes...
Page 87: ...Pozn mky Notes...
Page 88: ......
