EN
EN - 76
Cleaning the Spray Arms
It is necessary to clean the spray arms regularly for hard
water chemicals will clog the spray arm jets and bearings.
To remove the upper spray arm, screw off the nut clockwise
then remove the arm.
To remove the lower spray arm, pull out the spray arm
upward. Wash the arms in soapy and warm water and use
a soft brush to clean the jets. Replace them after rinsing them
thoroughly.
Cleaning the Filters
-
Inspect the filters for obstructions every time the dishwasher has been used.
-
By unscrewing the coarse filter.you can remove the filter system.Remove any food remnants
and clean the filters under running water.
step 1:
contrarotate the C ,and then lift it up;
step 2:
lift the Main filter up
step 3:
lift the Fine filter up
NOTE:
If do it from step1 to step 3, the filter system will be removed;
while if do it from step3 to step 1, the filter system
will be installed.
Summary of Contents for DFB 1266 MW8
Page 85: ...Pozn mky Notes...
Page 86: ...Pozn mky Notes...
Page 87: ...Pozn mky Notes...
Page 88: ......
