![Goddess CL 490 Instruction Manual Download Page 35](http://html.mh-extra.com/html/goddess/cl-490/cl-490_instruction-manual_2237740035.webp)
ENG
ENG - 35
After the introduction of the Intelligent Cleaner, please note the following operating
procedures:
Please ensure the battery is fully charged before starting the Cleaner.
Please tidy unfixed articles on the floor before using the Cleaner, and keep it from the spikes
at edge of carpet and power lines, etc. on the floor as possible.
Turn on its main power start button, there are three start buttons: Spot, Clean and Max,
representing three different cleaning modes. In addition, there is a timing work mode:
A. Spot mode (S):
The Cleaner can make repeated screw type cleaning within
the scope of 3 feet of diameter, focusing to clean a spot for
4 minutes. It’s applicable for cleaning the room where is dirty
at partial places.
b. Clean mode (M):
The Cleaner will automatically clean the room for 30 minutes.
The mode is applicable for cleaning small room.
C. Max mode (L):
The Cleaner won’t stop running until complete consumption of is
power. The working time is excess 60 minutes.If the auto charging
base plate is used, the Cleaner will automatically return to it for
charging.
D. Timing mode:
The cleaning time can be set by the time setting key on the charging
base plate. The Cleaner will leave the auto charging base plate to
work as per the pre-set time and the cleaning time is 60 minutes,
and then it will automatically return to the socket for charging (refer
to the Article of Charging for the detailed method).
If you don’t want your Cleaner to clean those areas beyond your desired cleaning area, ple
-
ase place the Virtual Wall Unit at the proper place such as the following illustration:
When wrong start button is pressed, the other start switch needs to be pressed twice before
cleaning.
The max working time for the Cleaner is about 60 minutes, which can meet the require
-
ments for cleaning a normal room. If the battery power is about to run out, the battery life
indicator will become red, and it will stop working. Charging of battery is needed.
1)
2)
3)
4)
5)
6)
Summary of Contents for CL 490
Page 49: ...Poznámky Notes ...
Page 50: ...Poznámky Notes ...
Page 51: ...Poznámky Notes ...
Page 52: ......