GO4 VEGA I1 IP CAMERA USER MANUAL
7
Figure 5
Enter the Wireless LAN Setting, click the “Scan” button, it will show you all the
wireless networks detected in the Wireless Network List column. Select one of
them and tick “Using Wireless Lan”, then the relevant data of the selected
wireless network will be shown in the following blanks. Input the password and
click “Submit”, the WIFI setting is completed. Unplug the cable, then you can
proceed to connect to router by wifi.
Notice: When the device is connected both WIFI and wired, it will firstly connect to
the wired network. If the camera enables DHCP to obtain IP address automatically,
the IP address won’t be the same in wired connection and wifi connection: in this
case we recommend to set a fixed IP address for the camera.