GO4 VEGA I1 IP CAMERA USER MANUAL
13
communicate with the router in the LAN and do the port forwarding with open
port of router automatically. In figure 16, you only tick “Using UPnP to Port
Mapping” to finish the setting.
Figure 16
Before using the UPnP function, please make sure the router’s UPnP function has
been enabled. Not all the routers support UPnP perfectly. Please test if the router
works well with the equipment, if not, we suggest you to disable this function and
set the port forwarding manually.
3.4 Alarm Settings
3.4.1 Alarm service setting
If the user needs to monitor a fixed area to check if there is any motion, it will
detect the motion and trigger the alarm. In the motion detect sensibility, the
smaller the value, the more is the sensitivity.
After triggering the alarm, you can adopt several alarm modes in armed time,
example of figure 17.
Link to the Preset when alarming: need to set preset point of the camera;
Send alarm info by email (an email include a picture); every alarm trigger a
email;
Send the snap to the FTP server, user can also set the interval time between
two pictures.
The device only triggers alarm when it detects any motion in armed time. User can
set schedule time to be “all the time”, also assign the armed time. Before you set
“Time Schedule”, please go to Date and Time settings to set the correct time for
the item.