GO4 VEGA I1 IP CAMERA USER MANUAL
5
2 Installation
guide
2.1 AP connection
Power on the camera
(Please check carefully output voltage of power adapter,
don’t insert incorrect adapter, otherwise it will damage the camera
), after 2
minutes, the camera will work normally. You can use PC or mobile phone to
connect directly the camera by WiFi, as Figure 1.
Figure 1
1) Turn WLAN on in PC, and search available SSID, if searched
AP SSID in device
label,
then you can connect it,
default password is 123456789.
2) After connecting the camera, it will assign IP address to PC (PC wifi IP address
need to be set to “obtain automatically”).
3) Open browser in PC, enter IP address of camera (AP default IP address is
192.168.246.1
) then you can visit the camera (refer to 2.2).
Note: Please check the user manual of mobile phone software when you connect
to the camera by mobile phone.
2.2 Wired connection to LAN
Power on the IP camera, connect IP camera to router by network cable,
meanwhile, connect computer to the same router, example of figure 2.
Figure 2
Insert CD to computer driver, double click “LSearch_en.exe” in the CD, run the
software, click “Search”, select the device searched, click “Browse” to open