11
REV.01
INSTALLATION INSTRUCTIONS
© 2016 Go Rhino Products. All rights reserved
Step-8 Position the front cover in place, align the holes in the front cover with the rivet-nuts in the
side rails and front base then attach the each side of the front cover to the side rail and front base
using (6) ¼” x ¾” button head screws and ¼” plastic flat washers, (Fig 10 & 11). Snug but do not
tighten the screws. Repeat to attach the rear cover to the side rails to the rear base.
Fig 10
Fig 11
C-H
C-H
3
1
5934048T Shown
