12
REV.01
INSTALLATION INSTRUCTIONS
© 2016 Go Rhino Products. All rights reserved
Step-9 With assistance position the SRM roof rack assembly with the top side down.
Using a drill motor and Philips bit, install (1) #10 x 1 1/8” rounded head screw in each hole in the
bottom of the side rails to secure the crossbars, (Fig 12 & 13). Note: The screws will thread through the
hole in the bottom of the side rail, pass through the clear hole in the crossbar cap bracket and thread
into the hole in the crossbar.
A
1
Fig 12
Fig 13
2
5934048T Shown
