Operating Instructions
Setting Battery 2
If you have a second battery connected,
the controller will immediately prompt you
to set the battery type for Battery 2 with a
blinking number 2.
To select the charging profile of Battery
2, press the
B Button
to toggle through
the profile options: Sealed/Gel, AGM or
Flooded.
To confirm the battery profile, press and hold the
A Button
for 3 seconds.
If there is not a second battery connected to the controller, or if the second
battery is connected with reverse polarity, the controller will not prompt
you to select battery type for Battery 2 and no status information will be
displayed on the LCD screen.
Non-volatile memory:
Any settings made on the GP-PWM-30 will be saved even
when the power has been disconnected from the controller. Refer to the Battery Charge
Profile Chart on page 15 for details on each profile.
Note
page 12
