GP-PWM-30-UL
_________________________________________________________________________________
25
© 2018 GoPower!
10.0 USB Charging
The GP-PWM-30-UL offers a standard USB connector for delivering 5.0
VDC to small mobile appliances such as cell phones, tablets, small
music players. This charging port is capable of supplying up to 800 mA
of current.
Remove the rubber cover of the USB terminal to access the terminal.
The USB charging port is
always active when the
USB symbol
appears on
the display.
Battery 1, connected to the
Battery 1 terminals, supplies
the power for the USB
charger.
The controller disables the
USB charger automatically if the battery 1 voltage drops below 11.0
VDC. If there is enough current from the PV panel/array available to
charge Battery 1 to above 12.8 VDC, the USB terminal will be enabled
again.
WARNING:
Do not connect the charging device anywhere else!
USB-Negative contact is connected to battery negative.
GP-PWM-30-UL Solar Controller
