19
The ONwheel motor detects automatically your pedaling speed and
adapts the switch on-off state to your pedaling behavior. If you stop
pedaling the ONwheel motor also stops.
For the function testing of the ONwheel complete kit, you can use the System Info
in the ONwheel App.
After you have finished all steps successfully you can go around with your ONwheel.
Please note, that the ONwheel motor needs a minimum speed of 6 km/h to get
activated. The ONwheel motor swings on to the rear wheel and pushes your bike
forward.
How fast the motor pushes you forward, you can set on the Power Buttons on your
handlebar. At the level 0 the motor is in passive mode/power grip mode. At the
levels between 1 and 4 you can regulate the speed in steps of 25% with each level.
Fixation of the ONwheel bag
The
ONwheel bag 08-1
gets mounted
under the bike seat onto the two struts
and on the front side on the saddle tube.
[P22]
Open the two hook and loop fastener on
the sides of the ONwheel bag 08-1 and
put them through the gaps between the
seat and the struts and close them again
on the sides of the ONwheel bag 08-1.
Take the textile elastic band on the
front and pull it through each other and
tighten it.
You can use the ONwheel bag 08-1 to
store your ONwheel motor securely.
P22
