Gnet BB0050 Configuration And Installation Manual Download

Page: 40 / 55

BB005x Installation and Configuration Guide

Gateway address

5. Click on

Apply

to confirm the new configuration.

If any other parameter changes need to be made to the DHCP server, click on

Advanced Options

at the bottom of the

DHCP Configuration

page.

DNS Client

This option allows the creation of a domain search list. The DNS client in
BB005x uses this list when a user asks for the IP address list for an incomplete
domain name.

To configure the DNS client:

►

Click on

DNS client

from the

Advanced Configuration

To add a server reference to the DNS client:

1. Type the IP address of the server into the

DNS Servers

text box.

2. Click on

Add

. The IP address appears in the DNS servers table. Up to

three server IP addresses can be added. To delete an IP address entry
from the list, click on its

Delete

button.

To configure DNS search:

1. Type search string in Domain search order text box
2. Click on

Add

The search string appears in the

Domain search order

table. Up to six search

strings can be added. To remove a string from the list, click on the

Delete

button.

DNS Relay

This option allows enabling, disabling and configuring of the DNS relay.

To configure the DNS relay:

►

Click on

DNS relay

To enable and configure the DNS relay:

1. Click on

Enabled

2. Click on

Configure

Summary of Contents for BB0050
























































Search results

Summary of Contents for BB0050

Reviews:

Related manuals for BB0050

Brands by name

Popular brands

Gnet BB0050, Configuration And Installation Manual

Search results

Summary of Contents for BB0050

Reviews:

Related manuals for BB0050

Brands by name

Popular brands