GNATUS Syncrus G8, Owner'S Manual

Page: 28 / 36

28
PRECAUTIONS, RESTRICTIONS AND WARNINGS
Recommendations for the dental equipment maintenance
Your Gnatus equipment has been designed and developed according to the standards of modern
techology. Similarly to other kinds of equipment, it requires special care, which is many times
neglected due to several reasons and circunstances.
Therefore, here are some important reminders for your daily routine. Try to follow these simple
rules, which will save you a lot of time and will avoid unnecessary expenses once they start making
part of your working procedure.
Transportation, storage and operation
This equipment must be transported and stored observing the following directions:
- Avoid falls and impacts;
- Keep it dry, do not expose it to rain, water drops or wet floor;
- Keep it away from water and direct sunlight, and in it original wrapping;
- Don’t move it over irregular surfaces, protect it from rain and observe the maximum stack quantity
specified in the packaging;
Environmental condition for transportation or storage:
- Room temperature range for transportation or storage -29ºC to +60ºC.
- Relative humidity range for transportation or storage 20% to 90%.
- Atmospheric pressure range 500hPa to 1060 hPa (375 mmHg to 795 mmHg).
Environmental condition for storage (among the operations):
- Room temperature range for storage -10ºC a +55ºC.
- Recommended room temperature range +15ºC a +30ºC.
- Relative humidity range for storage 30% a 75%.
- Atmospheric pressure range 700 hPa to 1060 hPa (525 mmHg to 795 mmHg).
Environmental operation condition:
- Room temperature range for funct10ºC to +40ºC.
- Recommended room temperature range +21ºC to +26ºC.
- Relative humidity range for functioning 30% to 75%.
- Atmospheric pressure range 700 hPa to 1060 hPa (525 mmHg to 795 mmHg).
- Operation altitude: ≤2000m.
Attention
The Equipment maintains its condition of safety and efficacy, provided that it is maintained
(stored) as mentioned in this instruction of use. Thus, the equipment will not lose or alter
its physical and dimensional features.