23
23
- Select application time, press time
selection button (01), which values are: 10s
(standard mode), 20s, 60s, 80s and 90s.
- To initiate a polymerization cycle, press
the timer trigger (02), which generates a
short beep every 10 seconds and a 4 beeps
at the end of cycle.
- To interrupt a polymerization cycle just
activate the timer trigger again (02).
Curing Light Activation *
IMPORTANT:
- Keep the light conductor tip (03) at least 2mm away from the restoration.
- Keep the light conductor (03) always protected by an expendable PVC film, which must
be changed for every patient. This procedure protects the light conductor from scratches
and other residues.
- Use the polymerization time recommended by the compound resin manufacturer and
always perform restorations in incremental layers with a maximum thickness of 2mm.
04
06
03
01
02
WARNING:
- Never aim the blue light beam towards the eyes;
- Use the eyesight protection (04);
- In order to protect the eyes, the eyesight protection (04) filters only the blue light
used for the resins polimerization, and it allows ambient light to pass through.
Water flow adjustment
01 -
Cup filler adjustment
02 -
Bowl flush adjustment
To
regulate the bowl flush and cup filling water
flow, use the bowl flush adjustment (02) and the cup
filler flow adjustment (01), to increase flow, turn it
anticlockwise, to decrease, turn in clockwise.
Regulation of the water selecting valve*
To regulate this kind of water feeding, please use the selecting valve (03) to select the
feeding through the reservoir and turn around in the clockwise sense. To select the feedign
through the net, turn around counter clockwise sense.
01
02
03
04
EQUIPMENT OPERATION
* Optional
