20
EQUIPMENT OPERATION
Control Panel
Water supply to the bowl is driven by the "optical sensor *"
*
*
*
01 - Water triggering in the Bowl
02 - Water triggering in the cup holder
03 - Water triggering heating syringe
WARNING:
To set the time of water flux in the cup holder,
press the "water in the cup holder" button (02)
for 3 seconds (it will produce a long beep and the
LED will flash).
Upon reaching the desired time, press again
the button "Water in the cup holder" (02). The
flux time is recorded. To set the time of the water flux in the bowl, press the "Water in the
bowl" button (01) for 3 seconds (it will produce one long beep and the LED will flash). Upon
reaching the desired time, press again "Water in the Bowl" (01). The flux time is recorded.
The settings "Water in cup holder" and "Water in the bowl" have a water flux timeout, 1
minute for the water in the cup holder and 4 minutes for the water in the bowl.
When turning the key "triggering heating water syringe" (03), the LED will turn on (A)
starting the heating of syringe water. The temperature must remain around 40º C. To turn
off the "trigger water heating", press (03) again.
A
01
02
03
Water supply is done automatically through the optical sensor (B) by simply approaching
the patient, providing greater convenience in operation.
The water unit is designed in order to meet the
left or right hand users, with ease of installation
of the "optical sensor set" on both sides, without
loss of functionality in any case. At the time of
installation by authorized technician from Gnatus,
inform desired position (right or left handed). He
will make necessary adjustments.
Optical sensor positioning for right or left-
handed
B
The ejectors (both BV and Venturi) start
working automatically when retired from the
tips support the BV ejectors feature suction flow
adjustment , and its regulated moving the lever
located at the ejector up or down.
Ejectors operation
* Optional
