background image

5

• Allows installation on Television set / Monitor with video / VGA Monitor input; 

•  Freezing  of  images  performed  through  key  available  on  the  handpiece;  allows  the 

operator greater freedom in usage; 

•  Installation  on  Computer  through  USB  device;  allows  storage  and  management  of 

images through specific software;

• Image selection made through Remote Control; allows selection one by one, or four 

simultaneous images directly on the television set or monitor;

• Lighting system through white LEDs with cold light, providing an image with a maximum 

degree of reality;

• Built in protective lens, protects the optic components against small accidents, scratches 

and dust; 

• Handpiece with anatomical format; allows capturing images with quality of the mouth 

and allows the use of devices for prevention of cross contamination; 

• Comes together with handpiece holder with automatic electromagnetic switch; allows 

positioning in the most diverse locations, such as: LCD Monitors, sides of delivery unit, water 

unit, cabinets, etc. Provides practicality, time and electrical power savings, turning on/off 

automatically upon being removed / placed in a different position in the holder.

• Light table module, compact and functional with interfaces for diverse applications; 

allows connections in VGA monitors, TV and Computer.

• Remote control with programming and image selection functions; allows greater mobility 

in control and storage of captured images;

• Handpiece communication cable in highly flexible material; allows flexibility and does 

not have the fragility found in fiber optic cables; 

• On/off switch placed on the handpiece, providing ease in activation;

• Switching power supply; allows use of the equipment at any supply voltage from 100V 

to 240V – 50/60Hz.

Indication of Equipment

 This equipment It must be operated and utilized by specialized professional  (certified 

professional, according to the legislation of the country) and following the instructions of 

the manual. 

The operation of the equipment required, for the professional, the utilization of 

correct instruments and it should to be in perfect conditions of the use, and to protect the 

professional, the patients and others, in the eventual danger situation.

Purpose of the equipment

The camera has the purpose of capturing images with quality of the mouth, allowing 

visualization of images with the maximum degree of reality (including blown-up images) 

through the monitor or television set, allowing perfect diagnosis. 

DESCRIPTION OF THE EQUIPMENT

Description of Equipment

Summary of Contents for In Cam LX Camera













































Reviews: