GNATUS In Cam LX Camera, Instructions For Use Manual

Page: 38 / 44

38
CORRECTIVE AND PREVENTIVE MAINTENANCE AND
PRESERVATION
To clean the equipment, we recommend the use of “BactSpray (Reg nº
MS: 3.2079.0041.001-5) or any other similar product: Active component:
Benzalkonium chloride (tri-quaternary ammonium)
Solution 50%................................................. 0.329%
Chemical composition: Butyl Glycol, Decyl polyglucose, Sodium Benzoate,
Sodium Nitrate, Essence, Deodorized Propane / Butane, demineralized Water.
For more information concerning cleaning procedures, see manufacturer’s
instructions.
NOTE: The registration at the Ministry of Health of the “BactSpray” is executed
separately from the product described in this manual, as the “BactSpray” is not
manufactured by Gnatus.
WARNING:
- In order to prevent risks and damages to equipment, make sure that the
liquid does not enter into the unit.
- The application of other solvent-based cleaning products or sodium
hypochloride isn’t recommended, because they may damage the equipment.
Cleaning
Important: In order to execute cleaning or any type of maintenance, ensure that the
equipment is disconnected from the electrical network.
• The cleaning procedure should be executed at the start of the working
day and after each patient. Always turn the main switch off before
executing the procedures of daily maintenance.
Use clean and soft cloth dampened in alcohol 70% to disinfection of the equipment.
Never use corrosive disinfectants or solvents.
Disinfection / Sterilization
The equipment should be calibrated routinely, as per the legislation in force in the country.
But never with a period exceeding 3 years.
In order to protect your equipment, seek Gnatus technical assistance for periodic revisions
of preventive maintenance.
Preventive Maintenance