GNATUS Autoclave Bioclave 12L, Owner'S Manual

Page: 7 / 24

7
17
17A
11
17B
16
18
GENERAL DATA
Caracteristics and operation
Steam internal outlets
They’re holes in the rear wall of the internal
chamber (17), they take the steam to the pressure
control valve.
Note: In the lower hole there’s a protective
filter (17A), it prevents solid residues from
entering the steam outlet.
External steam outlet
The 5/16” hose fitting, found in the autoclave
rear part, takes the steam outside.
Trays and support
The support (18) and the two trays (16)
keep the materials to be sterilized apart from the
chamber’s side walls, from the bottom and from
the water.
WARNING:
The material to be sterilized can’t be in contact
with any of the internal walls of the chamber.
Graduated glass
It’s used to dose the quantity of distilled water
needed for each sterilization cycle.
External steam outlet’s hose
This accessory must be connected and fixed
to the external steam outlet using a clamp (11). It
takes steam out.
Tray holder
It’s a device used to handle trays, avoiding
direct contact with the operator.
Accessories which accompany
the Autoclave