background image

 

 
1. Push in the control knob and turn it to the maximum setting.  Keep the  control knob pushed in 

and press the ignition button immediately.  

2. When the burner has lit, release the ignition button, but keep holding in the control knob for 15 

seconds (to heat the thermocouple). 

3. Release the control knob and then turn it to the required setting. 
 

Warning: Press the ignition button immediately.  If not pressed immediately then a build up 
of gas may cause the flame to spread. The ignition button should not be operated for more 
than  15s.      If  after  15s  the  burner  has  not  lit,  stop  operating  the  device  and  wait  at  least 
1min before attempting further ignition of the burner.  

Using and adjusting the pan fiddles  

 

 

The cooker is fitted with a sea rail onto which the 8 adjustable pan 
fiddles (2 per burner) are fitted.   
 
To attach the pan fiddle, open the thumbscrew on the clamp and 
place the saddle onto the sea rail. When the fiddle is in the correct 
position,  tighten  the  thumb  screw  to  hold  the  fiddle  firmly  in 
position 

 

Using the grill 

WARNING : Accessible parts may get very hot when the grill is in use.   Children should be kept 
away. 

 
 
Grill Heat control  

The grill control has one heat settings. The control knob turns to the right from 'OFF' to 

 

 

 
If  the  burner  flame  is  accidentally  extinguished  during  cooking,  turn  off  the  gas  and  wait  at  least 
one minute before attempting to reignite. 

Grill 

To light grill: 
 

1. Open the oven door 
2. Push in the control knob and turn it to the grill 

setting.  Keep the control knob pushed in and 
press the ignition button immediately.  

3. When the burner has lit, release the ignition 

button, but keep holding in the control knob for 
15 seconds (to heat the thermocouple). 

4. Leave the grill door partially open when you are 

using the grill. 

 

 

WARNING : Press the ignition button immediately.  If not pressed immediately then a build up 
of gas may cause the flame to spread. 

 

Summary of Contents for G1005

















Reviews: