GMX MOTORBIKES TRACKER 110cc, Assembly Manual, Page: 38 / 57

30
WATER CROSSINGS
The ATV can be used to cross slow moving, shallow water of up to a maximum of 11 cm (4 in) in depth. Before entering
the water, choose your path carefully. Enter where there is no sharp drop off, and avoid rocks or other obstacles which
may be slippery or upset the ATV. Drive slowly and carefully.
Test your brakes after leaving the water. If necessary, apply them several times to let friction dry out the linings. Do not
continue to ride your ATV without verifying that you have regained proper braking ability.
Wet brakes may have reduced stopping ability, which could cause loss of control. After
riding your ATV in water, be sure to drain any potentially trapped water by removing the
FKHFNKRVHDWWKHERWWRPRIWKHDLUdžOWHUFDVH
RIDING OVER ROUGH TERRAIN
Riding improperly over obstacles could cause loss of control or a collision. Before operating in a new area, check for
obstacles. Never attempt to ride over large obstacles, such as large rocks or fallen trees. When you go over obstacles,
always follow proper procedures as described in the Owner’s Manual. Riding over rough terrain should be done with
caution. Look out for obstacles which could cause damage to the ATV or could lead to an accident. Be sure to keep your
IHHWdžUPO\PRXQWHGRQWKHIRRWERDUGVDWDOOWLPHV$YRLGMXPSLQJWKH$79DQGDOZD\VULGHZLWKLQ\RXUDELOLWLHV
SLIDING AND SKIDDING
Skidding or sliding improperly may cause you to lose control of this ATV. You may also regain traction unexpectedly,
which may cause the ATV to overturn. Learn to safely control skidding or sliding by practicing at low speeds and on
level, smooth terrain. On extremely slippery surfaces, such as ice, go slowly and be very cautious in order to reduce the
chance of skidding or sliding out of control.