manualshive.com logo in svg

GMX MOTORBIKES TRACKER 110cc, Assembly Manual, Page: 2 / 57

Share
Download
GMX MOTORBIKES TRACKER 110cc Assembly Manual Download Page 2

This assembly guide covers basic step by step instructions to assist you with assembly process. Products are always subject to further improvement, 

which will cause some difference between vechicle and this manual without further notice. W wish you happy riding!

UNPACKING

Please CAREFULLY remove all external packaging and metal frame packaging.

TIP: Metal packaging can be sharp so when unpacking please handle with caution.

CHECK FOR LOOSE PARTS

On most occasions your bike will come 90% assembled (depending on the model). Please go through all lose parts and check packaging that has been 

taken out, to ensure no parts get thrown out so you can assemble your GMX Product. 

- Be careful to follow fuel/oil ratio requirements and not put to much oil in the fuel.

- Always use clean fuel - Never use old Fuel.

- After your Bike has sat for a period of time the oil in the fuel can settle in the bottom of the carbie bowl so be sure to drain the fuel and 

follow points in the trouble shooting to remedy.

- Do not overload the bike with more that the recommended weight capacity as this can cause undue wear/damage to the clutch.

WEAR SAFE

- Always wear a helmet.

- Wear protective clothing and gear such as goggles, long sleeves, long pants, boots and gloves/hand protection.

RIDE SAFE

- Never let children ride quad bikes that are meant for adults – even as passengers.

- Do not carry any passengers on quad bikes that are meant for one person.

- Quad bikes are not all-terrain vehicles so they cannot go safely on all types of terrain. Avoid riding on rough terrain or steep slopes.

- Ride on familiar tracks and beware of obstacles.

- Never ride under the influence of alcohol/drugs.

- Ensure children are supervised at all times near any quad bike activity.

- Always carry a mobile phone or radio device so you can contact help in case of an emergency.

READ MANUAL

Ensure that you read and go over the manual and UNDERSTAND before assembling this Bike.

PLEASE NOTE:

 Minor assembly is required, but in the interest of your safety it is recommended that you have this bike assembled by a skilled 

bike mechanic.

Summary of Contents for TRACKER 110cc


























































Reviews:

No comments