manualshive.com logo in svg

GMX MOTORBIKES TRACKER 110cc, Assembly Manual, Page: 24 / 57

Share
Download
GMX MOTORBIKES TRACKER 110cc Assembly Manual Download Page 24

16

FRONT & REAR BRAKES 

BRAKE LEVER

Check for correct free play in the brake levers. If the free play is incorrect, adjust it. Check operation of the levers. They 

VKRXOGPRYHVPRRWKO\DQGWKHUHVKRXOGEHDdžUPIHHOLQJZKHQWKHEUDNHLVDSSOLHG,IQRWKDYHWKH$79FKHFNHGE\D

Rival Motorsports Dealer. 
 

BRAKE OPERATION

Test the brakes at slow speed after starting out to make sure they are working properly. If the brakes do not provide 
proper braking performance, check the brake shoes/pads for wear. 
 

THROTTLE LEVER

Check the operation of the throttle lever. It must open smoothly and spring back to the idle position when released. 
If throttle is not operating properly DO NOT START ENGINE. Have a Rival Motorsports dealer correct the issue before 
operating this ATV. 
 

SWITCHES

Check to ensure all switches are working properly before starting the engine. 
 

DRIVE CHAIN

Check the condition of the drive chain and check the drive chain slack. Lubricate and adjust the drive chain as necessary. 
 

TIRES

&KHFNWLUHSUHVVXUHEHIRUHHDFKULGHWRPDNHVXUHLWLVDWWKHUHFRPPHQGHGVSHFLdžFDWLRQV36,$OVRFKHFNIRU

wear and damage. Adjust tire pressures when the tires are cold. Tire pressure must be the same per axle. This ATV is 
equipped with tubeless tires with valves. 
 

TIRE WEAR LIMIT

When the tire groove decreases to 3mm (0.12 in) due to wear, replace the tire. Never operate an ATV with worn tires, as 
this may cause loss of control, increasing your risk of an accident or death.

Summary of Contents for TRACKER 110cc


























































Reviews:

No comments