2.1 Model and type designation / identification
A type plate and serial number sticker are situated on the inside of the
housing cover (behind the accessories bag).In the case of queries, always
give the product designation and serial number.
2.2 Product description
The appliance tester has been developed for carrying out the following
measurements for testing the safety of electrical appliances in accordance
with DIN VDE 0701 and 0702 (BGV A3):
–
Measuring protective conductor resistance with compensation of the
measuring line
–
Measuring insulation resistance
–
Measuring substitute leakage current
–
Measuring protective conductor current (direct method or as differential
current)
–
Measuring touch current
–
Function test with measurement of mains voltage, load current, active
power, apparent power and reactive power, power factor and
frequency
–
Testing of non-heating devices and extension cables
2.3 Other equipment features
–
Stable, dust-proof carrying case as housing
–
Large, easy-to-read touch-screen for operating the tester (backlit)
–
Good/bad display in plain text (suitable for technically trained persons)
–
Connection for barcode scanner for reading-in the test object’s ID
numbers
–
USB-interface
–
MMC-card for saving and transporting measured data
–
PC standard software for saving and printing measurement reports
2.4 Scope of delivery
1 TG uni 1 appliance tester
1 safety test line, length 100 cm
1 safety crocodile clip, clip width 30 mm
1 safety test tip
1 USB cable, length 150 cm
1 MMC memory card 128 MB
1 CD-ROM with Windows®-PC standard software
1 accessories bag with velcro fastener and quick guide
1 operating manual
2.5 Optionale accessories
(not included in delivery)
–
Barcode scanner
–
RS232 PC interface cable, length 200 cm
–
Measuring adapter for testing devices with tree-phase connection (in
preparation for plug connectors CEE 3-pole, 16 A, 230 V; CEE
5-pole, 16 A, 400 V and CEE 5-pole, 32 A, 400 V)
–
Adapter for checking extension cables
–
PC software with database functions (customer master data, device
master data, test data, analysis function, data backup)
2.6 Transport and Storage
Please retain the original packaging for dispatch at a later date, e.g. for
calibration. Transport damage that occurs due to inadequate packaging is
not covered by the manufacturer’s guarantee.
The tester must be stored in a dry, closed room. If the device it transported
in extreme tenperatures, it requires at least 2 hours acclimatisation before
being switched on.
5
Operating manual for the TG uni 1 appliance tester
Introduction
