manualshive.com logo in svg

GMW TG uni 1, Operating Manual

Share
Download
GMW TG uni 1 Operating Manual Download Page 40

40

Fig. 66

f

14.

Conducting tests with the appliance tester TG uni 1 in
accordance with DIN VDE 0701 and DIN VDE 0702 – special test
procedure according to customer-specific settings

This input area is locked by a code key.
Please contact us for further information:
Tel. +49 (0)911 / 3502-0, Fax +49 (0)911 / 3502-307.

If several tests should be carried out with an identical setting of the tester,
the tester can be „pre-programmed“ for a test series – according to VDE
0701 or 0702 (also see Point 6.8).
In the following example the tester is set for the test according to DIN VDE
0702 (periodic inspection), differential current measuring method, PC I and
without insulation resistance.

The settings are entered in Setup in the Configuration menu, see Fig. 64 to
Fig. 75.

Fig. 64

Fig. 65

Operating manual for the TG uni 1 appliance tester
Conducting tests in accordance with VDE 0701 and 0702 - special test procedure

f

☞

Summary of Contents for TG uni 1













































Reviews:

No comments

Brands by name

Popular brands

Load more brands