GMW 5203, User Manual

Page: 59 / 71

Display
TFT 4.3” color display with large view angle
Local mode Voltage or current mode selected via display
Voltage or current output set by knob
Enable button for activating the output
Remote mode Remote mode connector on rear panel
Remote mode enabled by logic signal
Voltage or current mode selected by logic signal
Voltage or current output set by analog
programming signal
Tuning Response for different loads can be
fine-tuned at display
Voltage limit Absolute max voltage limit set via display
Current limit Absolute max current limit set via display
System specifications
Input voltage requirements 208V: 180-264VAC 47-63Hz 3-phase Delta, or
400V: 3 x 180-264VAC 47-63Hz L1, L2, L3, N
Selected by switch at rear panel
Input current typ. 15A/180VAC 12A/230VAC
Power factor typ. 0.95/230VAC at full load
Efficiency 0.75 at 4kW output power
Inrush current typ. 60A@230VAC at cold start
Leakage current < 2mA/240 VAC
Environmental requirements:
Ambient temperature
10 °C to 40 °C
Ambient humidity 30 to 70 % non-condensing
Storage temperature -20 °C to +85 °C
Cooling Forced air cooling (front in, rear out)
Removable, washable dust filter with capability
to replace
Unit dimensions:
Mounting
19” rack. Provision for rack slides
Height
221,5 mm (5U, 8.75”)
Width
483 mm (19”)
Depth
740 mm (29.1”)
Weight 55 kg (121 lb)
Bipolar
Power Supply
BPS-40-100
Regulatory
Designed to meet EN 61010, UL 61010
AC/DC section: UL60950-1, TUV 60950-1 approved
CE marked
Data subject to change without notice. Copyright Oy International Electric Company 2020.