GMR STAMA Evo, Operating Instructions Manual

Page: 9 / 26

GMR maskiner a/s
STAMA Micro, Parker, Mini, Multi, Evo, Maxi EL
Operating
Page 9
Operating Instructions
GB
Preparation
Before starting, check that:
• The battery is fully charged
• The battery electrolyte density is correct
• The battery is clean
• There is no battery error or operating fault
Turn the main switch. Micro truck: the main switch is on the right-hand
side of the vehicle under the truck bed. Mini truck: the main switch is to
the right of the steering column. Multi truck: the main switch is on the
back of the seat box. On the Maxi truck the main switch is on the left-
hand side of the vehicle under the seat box.
Turn and hold the ignition key on the dashboard in that position until
the display lights up and the hydraulic pump has accumulated servo
pressure.
Pre-start inspection
Pre-start inspection
Operating
Direction of travel
Read the "Preparation" section before operating the truck.
Select direction of travel – forward or reverse – using the selector on
the dashboard. Regulate speed using the foot pedal. The foot pedal
also acts as an engine brake (release pressure on the foot pedal).
Release the foot pedal. The motor brakes. If you need to brake harder,
use the foot brake.
Stopping
Unloading/tipping Activate switch on the dashboard. Unloading/tipping starts.
To stop the truck and all its moving parts, turn the ignition switch to the
OFF position and then turn the main switch anticlockwise.
Emergency stop