GMR STAMA Evo, Operating Instructions Manual

Page: 8 / 26

GMR maskiner a/s
STAMA Micro, Parker, Mini, Multi, Evo, Maxi EL
Safety requirements
Page 8
Operating Instructions
GB
Vibrations There are no significant vibrations as the machine is electrically
powered.
Disposal
When disposing of the truck, the battery should be recycled. The
remainder of the truck should be disposed of by a scrap dealer.
WARNING
Moving parts
Take care not to allow people or objects to get
crushed when tipping the truck bed.
WARNING
Safety guards
When the truck is in operation, all safety guards must
be secured.
WARNING
Maintenance
Before starting maintenance work, bring the truck to a
complete standstill to ensure that there is no danger
of personal injury due to moving parts.
The truck speed should be adapted to the conditions, i.e. reduce
speed at corners and in narrow passages. There is a risk that the truck
may overturn when travelling on an incline. Never drive on an incline
of more than 20° across the direction of travel. When travelling fully
loaded down a steep hill, the truck must travel at very slow speed
(tortoise mode). If you drive too fast down a hill, the truck may (worst
case) run out of control. Make sure the brakes are in good working
order at all times.
Max. incline in direction of travel:
• about 40% over a distance of 0.5 metres
• about 20% over a distance of 1-2 metres
• about 15% over a distance of 3-5 metres
If the incline is steeper and the truck fully loaded, there is a risk that the
truck will stall on the incline and (worst case) may roll backwards.
Speed, slopes and in-
clines