background image

GMR maskiner a/s

STAMA Micro, Parker, Mini, Multi, Evo, Maxi EL

Lead-acid batteries

Page 12

Operating Instructions

GB

Depending on type and production year, your truck will have one of two 

different types of battery charger.

Function

SMC-HF 600/800

Curtis 1621

•  Connect the battery. Switch on the mains supply. The POWER ON 

diode is lit when the unit is charging.

•  When the charging level reaches 2.43 V per cell, the charger 

reduces charging to a pre-programmed voltage charge level and the 

next diode lamp lights up. The charger charges at constant voltage 

for about 60% of the main charging period.

•  Then the pulsed maintenance charging phase starts. A green diode 

lights up. 

The battery is now fully charged.

Recharging

•  If the battery does not reach 2,43 V per cell after 10 hours of 

recharging, switch off the charger. The lower red diode lamp lights 

up. The red diode lamp indicates that there is an error or that 

charger safety is compromised.

•  If the total charging time exceeds 16 hours, the charger switches  

to maintenance charging.

•  In the event of a power cut, the charging timer is interrupted. The 

timer restarts when the power is resumed. The charger's charging 

diode lamp is extinguished during a power cut.

Operating errors

Summary of Contents for STAMA Evo



























Reviews: