MAIN DEVICES
☞ Tension Adjustment of Conveyor Belt
Long time operation could make conveyor belt loosen.
If the belt is loosen, feeding could not be working properly.
Adjust its tension with Tension Adjustment Bolts that are at Feed Table.
Turn it to the right to increase tension and turn it to the left to decrease it.
(Adjust it with 5mm Wrench that is packed in the machine.)
☞ FILM TENSTION ADJUSTMENT KNOB
to adjust film tension.
Turn the knob to the right to increase its tension and turn it left to decrease its tension.
Adjust its tension to remove wrinkle of film at the rollers.
Basically, a laminted result is curled downward, increase the top film tension and
increase bottom film tension when a laminated result is curled upward.
☞ REWINDER TENSTION ADJUSTMENT KNOB
This handle functions is to adjust tensile of film of rewinder.
Use this handle when film tension is loosened or tightened too much
When turning Film Tension Control handle to the right, film tension
increses and turning to the left, it reduces.
Tension Adjustment Bolt
REWINDER TENSTION
ADJUSTMENT KNOB
FILM TENSTION
ADJUSTMENT KNOB
23/48
