Page 10 of 12
General Machine Products Co., Inc.
6. TROUBLESHOOTING GUIDE
CABLE BLOWING MACHINE STOPS SUDDENLY DURING CA-
BLE INSTALLATION
Maximum hydraulic pressure achieved
Obstacle in duct installation
Power Pack out of fuel
Emergency stop button pressed
Damaged lead between Power Pack and blowing machine
EXCESSIVE AIR LEAKAGE FROM OVERBLOWING JUNCTION
BOX
Damaged cord seal
Cable seals worn, incorrect size, installed wrong way around.
POWER PACK ENGINE DOES NOT STOP AT MAX PRESSURE
There is a fault with the cable blowing machine, refer to the ca-
ble blowing machine operator and maintenance manual for in-
structions to rectify the problem.
