Page 4 of 12
General Machine Products Co., Inc.
GENERAL PNEUMATIC SAFETY INSTRUCTIONS
The GMP Overblowing Junction Box is used in conjunction with the GMP Fiber
Optical Cable Blowing Machine, both are pneumatic devices, they use pressur-
ized air to project cable at high velocities. Please observe the following precau-
tions when operating the Cable Blowing Machine: -
1. Compressed air can cause flying debris. This could cause personal injury.
Always wear personal protective equipment.
2. Ensure no personnel are in the manhole at the far end of the cable / tube
run. Severe personal injury may result.
3. Never open the Cable Overblowing Junction Box air chamber when pres-
surized.
Only authorized, fully trained personnel should operate the air compressor.
