11-SAFETY HARNESS – 10
The high chair is equipped with a 5-point safety harness to
ensure safety.
To release it, press the central button on the buckle (a)
and pull out the side clips.
To fasten the harness push the clips of the back belts into
the central buckle, until they fully lock into place (b).
The shoulder belts can be adjusted depending on the
height of the child. Move the adjusters as needed (C).
The belts must be adjusted according to the child's size. It
should neither be too loose or too firm so that it does not
hurt the child. If you wish to adjust height of the shoulder
belt or to remove the belts, flatten the "butterfly" end piece
and slide it through the openings in the seat (d). If you wish
to mount the belt again, flatten the "butterfly" end piece
and slide it through the selected opening in the back rest
and then open the end piece again (e).
12-FOLDING AND STORING THE CHAIR – 11
Lower the seat (see step 7-6). For storage, it is
recommended to lower the seat into the lowest position.
Put the tray on the rear legs (see step 10-9).
Press the button (a) located on the joint of each leg and
push on the front frame (B), until it snaps into folded
position.
13-REMOVAL OF THE UPHOLSTERY – 12
Remove the safety belts from the openings in the back rest
and in the seat (a) and pull them out (see step 11-10)
.
Release the snap fastener on both sides of the seat
upholstery (b). Pull the upholstery up and remove it from the
seat (c).
To put the upholstery back take all the previous steps in
reverse order.
Pay increased attention
when mounting the safety
harness. Always make sure
that the belt end pieces
have opened properly (d).
15-1109_Jidelni_zidle_navod.indd 21
9.11.2015 15:54:25
