3-ASSEMBLY OF THE HIGH CHAIR – 2
Please observe the left and right marking (L (left) / R (right)). Mount the upper legs of the
high chair into the assembled seat (2) by sliding the legs through the height adjustment
stopper. Press the button on the frame joint to unfold the frame (2a). Once the frame is fully
unfolded, there will be an audible click of the safety.
Mount the front lower legs (3) on the front upper legs of the frame. The lower legs have two
locking pins. Push the locking pins located on each side of the lower legs and insert the
lower legs into the end pieces of the front frame. Push the lower legs into the frame, until
the locking pins come through the holes in the chair frame. Repeat these steps also for the
rear legs (3a).
4-ASSEMBLY OF THE HIGH CHAIR – 3
ATTENTION:
The chair is equipped with rear
wheels. Always brake the wheels, if there is a
child in the chair or if the chair is not folded.
ATTENTION:
Place the chair only on flat and
stable surfaces. Never place the chair
near stairs.
15-1109_Jidelni_zidle_navod.indd 18
9.11.2015 15:54:24
