5-POSITIONING OF THE BACK REST – 4
The back rest can be tilted in three positions.
To set the required position press the lever on the rear
side of the back rest, tilt the back rest into the required
position and release the lever. If the back rest is set
correctly, it should snap into its position. The back rest
should be positioned in one of the three series of
grooves in the rear part of the arm rest (4).
6-POSITIONING OF THE FOOT REST – 5
The foot rest can be adjusted in two positions. Push the buttons (5) located on both sides
of the foot rest at the same time and set the foot rest to the desired position. Apply gentle
pressure on the foot rest, until it snaps into its place. Then release the buttons.
The foot section can be adjusted in three positions. Push it into the opening of the desired
position (5a).
To adjust the seat height press the buttons located on the rear part of both height
adjustment stoppers (6).
Push the seat height adjustment element up to lift the seat or down to lower it.
The seat has 7 height position, position 1 being the highest. Before you put your child into
the chair, make sure that same height has been set on both legs and that the stopper has
fully snapped into the opening in the chair leg.
7-ADJUSTMENT OF THE SEAT HEIGHT – 6
15-1109_Jidelni_zidle_navod.indd 19
9.11.2015 15:54:24
