TX3600 SErIES
INSTrUCTIoN MANUAL
PAgE 19
selected, 'PAgEr' will be displayed in the Selcall area.
MC522BC-
Press the and
keys to select Selcall
memory 39. The selected selcall memory number is
displayed in the channel display area. If Alpha mode is
selected, 'PAgEr' will be displayed in the Selcall area.
MC522BC OPTION
3. Briefly press the
Volume
knob to select the Numeric
mode. 'NUMEr' will appear briefly in the Selcall display
area when Numeric mode is selected.
MC522BC-
Briefly press the
B
key to select the Numeric
mode. 'NUMEr' will appear briefly in the Selcall display
area when Numeric mode is selected.
4
To enter the EDIT mode
, press and
hold
the
Channel
Selector
knob until a beep is heard. 'EDIT' will appear
briefly in the selcall display area and the right hand selcall
digit will begin flashing.
MC522BC-
To enter the EDIT mode
, press and
hold
the
A
key until a beep is heard. 'EDIT' will appear briefly in
the selcall display area and the right hand selcall digit
will begin flashing.
5. rotate the
Channel Selector
knob to alter the flashing
digit. When the correct digit is displayed, briefly press
the
Channel Selector
knob to move to the next digit.
Continue the process until the required Selcall Ident
is displayed.
MC522BC-
Press the and
keys to alter the flashing
digit. When the correct digit is displayed, briefly press the
A
key to move to the next digit. Continue the process
until the required Selcall Ident is displayed.
6. Now press and
hold
the
Channel Selector
knob again
to store the Ident. All the digits will flash, then the radio
will beep and 'SAVED' will appear briefly in the
selcall area.
MC522BC-
Now press and
hold
the
A
key again to store the
Ident. All the digits will flash, then the radio will beep and
'SAVED' will appear briefly in the selcall area.
Viewing the Page ident Memory:
To view the Ident or Name stored in the page memory:
1. Briefly press the
CaLL
key on the microphone. 'Call
To' will appear on the display, and the Selcall Ident for
memory location 1 will be displayed.
2. Rotate the
Channel Selector
knob to select Selcall
memory 39. The selected selcall memory number is
displayed in the channel display area. If Alpha mode is
selected, 'PAgE' will be displayed in the Selcall area.
MC522BC-
Press the and
keys to select Selcall
memory 39. The selected selcall memory number is
displayed in the channel display area. If Alpha mode is
selected, 'PAgE' will be displayed in the Selcall area.
activating the
PAGE
Mode:
Select the Page mode by briefly pressing the
PAGE
function
key on your radio.
‘PAgE’ will be displayed in the Selcall area and the display
lighting will extinguish after 10 seconds to conserve power
in case the radio is to be left in Page mode for an extended
period. This also makes the radio less visible if it is left in an
unattended vehicle at night.
deactivating the
PAGE
Mode:
To de-activate the page mode, briefly press the
PAGE
function key again.
receiving your Selcall in
PAGE
Mode:
If your TX3600 Series receives its own Selcall Ident while
in the PAGE mode, it will temporarily switch to the paging
channel, check that the channel is not in use, then transmit
the paging Ident to the other receiver. It will then return to
the channel on which the original call was received, activate
its own Selcall alarm and display the caller's Ident.
Meanwhile the other receiver will be beeping to tell you that
someone has called you. you can then return to your radio,
Identify the caller's Ident and return the call.
The PAGE mode can be used either while monitoring a single
channel or while scanning in open scan or group scan mode.
Monitoring a Single channel in the PaGE Mode:
To monitor a single channel in the PAGE mode, simply select
the channel you wish to monitor, then select the Page mode
by
holding
the
CaLL
key down and pressing the
Channel
Selector
knob.
MC522BC-
To monitor a single channel in the PAGE mode,
simply select the channel you wish to monitor, then select
the Page mode by
holding
the
CaLL
key and pressing the
A
key.
PAGE Selcall Ident
Selcall memory 39
PAGE Selcall Ident
Selcall memory 39
