PAGE 16
INSTRUCTION MANUAL
TX3600 SERIES
A
key to move to the next digit. Continue the process
until the required Selcall Ident is displayed.
6. Now press and
hold
the
Channel Selector
knob again
to store the Ident. All the digits will flash, then the radio
will beep and
'
SAVED' will appear briefly in the selcall area.
MC522BC-
Now press and
hold
the
A
key again to store
the Ident. All the digits will flash, then the radio will beep
and 'SAVED' will appear briefly in the selcall area.
7.
To program an Alpha Label
, briefly press the
Volume
Knob. 'ALPhA' will appear briefly in the
selcall area.
MC522BC-
To program an Alpha Label
, briefly press the
B
key. 'ALPhA' will appear briefly in the selcall area.
8. Enter the EDIT mode again by pressing and
holding
the
Channel Selector
knob until a beep is heard. 'EDIT' will
appear briefly in the selcall display area.
MC522BC-
Enter the EDIT mode again by pressing and
holding
the
A
key until a beep is heard. 'EDIT' will appear
briefly in the selcall display area.
9.
Rotate the
Channel Selector
knob
to select the
‘rightmost’ character of the label you wish to enter. When
done, briefly press the
Channel Selector
knob to move
left to the next character position. Continue the process
until the required label is displayed. Up to 5 characters
can be entered.
MC522BC-
Press the
A
key to select the ‘rightmost’
character of the label you wish to enter. When done,
briefly press the
A
key to move left to the next character
position. Continue the process until the required label is
displayed. Up to 5 characters can be entered.
10. Now press and
hold
the
Channel Selector
knob again
to store the Label. All the characters will flash, then the
radio will beep and 'SAVED' will appear briefly in the
selcall area.
MC522BC-
Now press and
hold
the
A
key again to store
the Label. All the characters will flash, then the radio will
beep and 'SAVED' will appear briefly in the selcall area.
Briefly press the
CaLL
key again (or wait 20 seconds) to
return to normal mode.
The following characters can be selected in the Alpha mode:
* + - 0 1 2 3 4 5 6 7 8 9 A B C D E F
g h I J K L M N o P Q r S T U V W X y Z <SPACE>
Sending individual Selcalls:
If this feature is available, you can enter and send individual
selcall codes without the need to store or retrieve them from
the memory.
1. Briefly press the
CaLL
key. 'Call To' will appear on
the display, along with the Selcall Ident for memory
location 1.
2. If the radio is in Alpha mode, briefly press the
Volume
knob to select the Numeric mode. 'NUMEr'
will appear briefly in the selcall display area to indicate
the selected mode.
MC522BC-
If the radio is in Alpha mode, briefly press the
A
key to select the Numeric mode. 'NUMEr' will appear
briefly in the selcall display area to indicate the selected mode.
3. Press and
hold
the
Channel Selector
knob until a beep
is heard. 'EDIT' will appear briefly in the selcall display
area and the right hand selcall digit will begin flashing.
MC522BC-
Press and
hold
the
B
key until a beep is
heard. 'EDIT' will appear briefly in the selcall display
area and the right hand selcall digit will begin flashing.
4. Rotate the
Channel Selector
knob to alter the flashing
digit. When the correct digit is displayed, briefly press
the
Channel Selector
knob to move to the next digit.
Continue the process until the required Selcall Ident
is displayed.
MC522BC-
Press the
B
key to alter the flashing digit.
When the correct digit is displayed, briefly press the
B
key
to move to the next digit. Continue the process until the
required Selcall Ident is displayed.
5. Now press and
hold
the
CaLL
key to transmit the Selcall
code. The 'TX' indicator will appear on the display as the
Selcall code is sent.
Note:
you must send the Selcall code within 20 seconds
of the last key press otherwise the Call To mode will be
cancelled and the code will be lost.
If your Selcall is successful, you will hear two quick beeps in
the speaker confirming to you that your Selcall was received.
GROUP SELCALLS
your TX3600 Series Selcall system may have been
programmed with a Group Call function. Group Calling can
allow you to call groups of up to 10 radios, or groups of
up to 1000 radios simultaneously, depending on how your
radio is programmed. This could be useful in an emergency
situation where you may need to transmit a message to a
number of radios in your group.
The group Call function works by allowing you to enter
a special group code into the last digit positions of the
Selcall Ident you are sending. The group code appears as
