manualshive.com logo in svg

GME MC522BC LCD Microphone, Instruction Manual

Share
Download
GME MC522BC LCD Microphone Instruction Manual Download Page 13

TX3600 SERIES 

INSTRUCTION MANUAL 

PAGE 13

•   When Quiet is disabled, you will be able to hear all 

transmissions on the channel. 

•   When Quiet is enabled, you will see the 'QUIET' icon on 

 

the display.

MC522BC OPTION

your radio may be programmed to allow you to select those 

channels you wish to use as quiet channels. This is done 
by tagging the channels that you want to stay Quiet. Then, 
when QUIET is activated, the channels you have tagged will 
remain Quiet to all incoming signals. Channels not tagged 
will operate normally. The QUIET

 key is also used to tag 

these channels.

To tag a channel for use in the QUIET mode:

1.    Select the required channel using the 

Channel  

Selector

 knob.

 

MC522BC-

 

Select the required channel by pressing  

the   and 

 keys.

2.   Press and 

hold

 the 

QUIET

 key until a high beep 

 

is heard.

The 'Q' icon will appear on the display, indicating that the 

selected channel is now tagged for use with Selcall in the 
quiet mode.

MC522BC OPTION

3.  Repeat steps 1 and 2 to tag any other channels.

To activate the 

QUIET mode:

1.   Select a channel which has been tagged for quiet 

operation ('Q' will be visible on the display).

2.  Briefly press the 

QUIET

 key.

A high beep will be heard and the 'QUIET' icon will appear 

on the display.

Now all channels that have been tagged for quiet operation 
will stay quiet unless a Selcall is received. Channels that are 
not tagged will still allow all signals to be heard.

Note: 

you cannot activate the 

QUIET mode unless you have 

selected a ‘tagged’ channel with ‘Q’ displayed.

To de-activate the 

QUIET mode:

1.   Select a channel that has been tagged for quiet operation 

('Q' and 'QUIET' will be visible on the display).

2.   Briefly press the

 QUIET

 key. A low beep will be heard 

and 'QUIET' icon will disappear from the display and all 

channels tagged for Quiet operation will now operate 
normally again.

To remove the QuiET Tagging:

1.   Select a channel that has been tagged for Quiet 

operation. 'Q' will be displayed to the upper left or 

 

upper right (MC522BC) of the channel number. 

2.   Press and 

hold

 the 

QUIET 

key until a low beep is heard. 

The 'Q

'

 icon will disappear from the display, indicating 

that the selected channel is no longer tagged for use  
with Selcall in the QUIET mode. 

receiving Signals in the QuiET Mode:

•   If a normal signal is received on a QUIET channel, the 

channel will appear busy but no sound will be heard  

from the speaker. This means you will not be disturbed

 

by the signal.

•   If a normal signal is received on an open channel 

 

(one that is not tagged with ‘Q’) the signal will be 

 

heard in the usual way.

•   If a signal containing your Selcall Ident is received on 

any channel – open or Quiet – the QUIET mode will be 

cancelled and the alarm will beep to alert you to the call. 
In addition, the callers Ident or Name will be displayed. 
All channels will now be open for normal transmission 
and reception.

Scanning in the Quiet Mode

The TX3600 Series may be programmed to allow you to scan  

while the QUIET mode is active. you can then monitor a 

group of Quiet channels or a combination of Quiet and  
Open channels.

Quiet is enabled in this channel

Selected channel is tagged for QUIET mode

Selected channel is tagged for QUIET mode

Quiet is enabled in this channel

Summary of Contents for MC522BC LCD Microphone

























Reviews:

No comments

Brands by name

Popular brands

Load more brands