background image

1. Unpacking and Packaging list 

Before installation, please unpack the system packages and check if all the system components 
are available according to list below. Or should any components listed below are damaged during 
transport, please contact your seller or the supplier GMDE.   

 
Packaging List   
 

System Component   

1.   

Hybrid Inverter Powervortex 305KTL 

1 PCS 

GMDE 19” System Cabinet (with EMS unit, On/Off-grid switching box, 
Battery Control Box 150V integrated, energy meter included ) 

1 PCS 

Battery Module M15020   

2 PCS 

Document 

User Manual   

1 PCS 

Table 1 Packaging List 

 

 

2. System Overview 

This manual describes the installation and operation of the 

GHESS  series  solar  battery  hybrid 

energy  storage  system  (HESS).  The  GHESS  series  hybrid  energy  storage  system  is  designed  and 
developed by GMDE Technology Ltd. and can be widely used in residential applications. In which, 
the  GHESS  5.0_6.0kWh  refers  to  a  solar  battery  hybrid  system  with  5.0kW  nominal  AC  output 
power and 6.0kWh lithium-ion battery capacity. As the battery module adopted in this system is 
150V20Ah cell, this system is battery capacity extendable with each step 3kWh (150V20Ah). 

 

 

System Overview Diagram 

Figure  1  is  an  overview  diagram  when  installing  the  GHESS  system  and  connecting  it  with Grid 
and Load.   
 

Summary of Contents for GHESS 5.0_6.0KWH





















Reviews: