background image

4

Specifications

Charger

Input:                                                 240V AC 50Hz
Output:                                              12V DC 300mA

                                                      DC charger adaptor 

                                                           fuse 0.5A

SpotLight

Spotlight Bulb:                                  6V 55W Max Type H-3
Battery:                                             Maintenance free, 

                                                           sealed lead acid, 

                                                           6V, 3 Amp hour 

DC charger adaptor fuse:               0.5A
Weight:                                             1.5kg
Length:                                             209.5mm
Width:                                                101.6mm
Height:                                              196.85mm
Charge Time:                                   AC Approx 12–15 hours  

                                                           (after first use)

                                                           DC Approx 12 - 15 hours

Lighting Duration Spotlight:            Low  

Approx 40 Min

                                                           Med 

Approx 30 min

                                                           High 

Approx 15 Min

Safety instructions

WARNING. 

Read and understand all instructions. Failure to 

follow all instructions listed below may result in electric shock, fire 

and/or serious injury. The term “power tool” in all of the warnings 

below refers to your mains-operated (corded) power tool or battery-

operated (cordless) power tool.

SAVE THESE INSTRUCTIONS
Work Area

1.  Keep work area clean and well lit. Cluttered and dark areas 

invite accidents.

2.  Do not operate power tools in explosive atmospheres, 

such as in the presence of flammable liquids, gases, or 

dust. Power tools create sparks which may ignite the dust 

or fumes.

3.  Keep children and bystanders away while operating a 

power tool. Distractions can cause you to lose control.

Electrical Safety

1.  Power tool plugs must match the outlet. Never modify the 

plug in any way. Do not use any adapter plugs with earthed 

(grounded) power tools. Unmodified plugs and matching 

outlets will reduce risk of electric shock.

2.  Avoid body contact with earthed or grounded surfaces 

such as pipes, radiators, ranges and refrigerators. There 

is an increased risk of electric shock if your body is earthed 

or grounded.

3.  Do not expose power tools to rain or wet conditions. 

Water entering a power tool will increase the risk of electric 

shock.

4.  Do not abuse the cord. Never use the cord for carrying, 

pulling or unplugging the power tool. Keep cord away 

from heat, oil, sharp edges or moving parts. Damaged or 

entangled cords increase the risk of electric shock.

5.  When operating a power tool outdoors, use an outdoor 

extension cord suitable for outdoor use. Use of a cord 

suitable for outdoor use reduces the risk of electric shock.

Summary of Contents for VEC156-AU

















Reviews: