GMC Terrain Manual Download Page 171 | Manualshive

Page: 171 / 323

background image

GMC Terrain/Terrain Denali Owner Manual (GMNA-Localizing-U.S./Canada/

Mexico-9234776) - 2016 - crc - 6/4/15

170

Driving and Operating

brake pedal is released or brake
pedal pressure is quickly
decreased.

Hill Start Assist (HSA)

This vehicle has an HSA feature,
which may be useful when the
vehicle is stopped on a grade
sufficient enough to activate HSA.
This feature is designed to prevent
the vehicle from rolling, either
forward or rearward, during vehicle
drive off. After the driver completely
stops and holds the vehicle in a
complete standstill on a grade, HSA
will be automatically activated.
During the transition period between
when the driver releases the brake
pedal and starts to accelerate to
drive off on a grade, HSA holds the
braking pressure for a maximum of
two seconds to ensure that there is
no rolling. The brakes will
automatically release when the
accelerator pedal is applied within
the two-second window. It will not
activate if the vehicle is in a drive
gear and facing downhill, or if the
vehicle is facing uphill and in
R (Reverse).

Ride Control Systems

Traction Control/
Electronic Stability
Control

System Operation

The vehicle has a Traction Control
System (TCS) and StabiliTrak

®

, an

electronic stability control system.
These systems help limit wheel slip
and assist the driver in maintaining
control, especially on slippery road
conditions.

TCS activates if it senses that any
of the drive wheels are spinning or
beginning to lose traction. When this
happens, TCS applies the brakes to
the spinning wheels and reduces
engine power to limit wheel spin.

StabiliTrak activates when the
vehicle senses a difference between
the intended path and the direction
the vehicle is actually traveling.
StabiliTrak selectively applies
braking pressure to any one of the

vehicle wheel brakes to assist the
driver in keeping the vehicle on the
intended path.

If cruise control is being used and
traction control or StabiliTrak begins
to limit wheel spin, cruise control will
disengage. Cruise control may be
turned back on when road
conditions allow.

Both systems come on
automatically when the vehicle is
started and begins to move. The
systems may be heard or felt while
they are operating or while
performing diagnostic checks. This
is normal and does not mean there
is a problem with the vehicle.

It is recommended to leave both
systems on for normal driving
conditions, but it may be necessary
to turn TCS off if the vehicle gets
stuck in sand, mud, ice, or snow.
See

If the Vehicle Is Stuck

0

153

and

“

Turning the Systems Off and

On

”

later in this section.

«
...
169
170
171
172
173
...
»

Summary of Contents for Terrain




































































































































































































































































































































Reviews:

No comments

Related manuals for Terrain

Brand: Pacbrake Pages: 9

Brand: Baja Designs Pages: 6

Brand: ULTIMATE SPEED Pages: 19

Brand: RaceChip Pages: 12

Electronic Parking Disc 3

Brand: Jacob Jensen Pages: 2

Brand: Yakima Pages: 12

Brand: ECS Electronics Pages: 16

Brand: Gator Pages: 8

Brand: Nav TV Pages: 3

Brand: minnid Pages: 44

Brand: mtf TRANSPORT SYSTEM Pages: 9

Brand: Guidosimplex Pages: 8

Brand: Oldsmobile Pages: 354

Brand: BrandMotion Pages: 6

Brand: OHIOSTEEL Pages: 2

Brand: Xingyun Pages: 74

Brand: RAM Pages: 5

Brand: Mazda Pages: 1001

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands