GMC Terrain Manual Download Page 223

Page: 223 / 323

GMC Terrain/Terrain Denali Owner Manual (GMNA-Localizing-U.S./Canada/

Mexico-9234776) - 2016 - crc - 6/4/15

222

Vehicle Care

6. Turn the bulb socket

counterclockwise and pull
it out.

7. Pull the bulb straight out of the

socket.

8. Install the new bulb.

9. Push the bulb socket in and

turn it clockwise.

10. Reverse Steps 2

–

5 to reinstall

lamp assembly.

Back

–

Up Lamp

Removal of the lamp assembly is
not required to replace the back-up
lamp bulb.

To replace one of these lamps:

1. Open the liftgate. See

Liftgate

2. Remove the interior trim

access panel.

3. Turn the bulb socket

counterclockwise and pull
it out.

4. Pull the bulb straight out of the

socket.

5. Install the new bulb.

6. Push the bulb socket in and

turn it clockwise.

7. Reinstall the interior trim

access panel.

License Plate Lamp

Lamp Assembly

Bulb Assembly

1. Bulb Socket

Summary of Contents for Terrain




































































































































































































































































































































Search results

Summary of Contents for Terrain

Reviews:

Related manuals for Terrain

Brands by name

Popular brands

GMC Terrain, Manual

Search results

Summary of Contents for Terrain

Reviews:

Related manuals for Terrain

Brands by name

Popular brands