GMC TERRAIN 2018 Owner'S Manual Download

Page: 13 / 312

GMC Terrain/Terrain Denali Owner Manual (GMNA-Localizing-MidEast-

11348267) - 2018 - crc - 6/27/17

In Brief

2. Push and pull on the seatback

to make sure it is locked.

See

Reclining Seatbacks

Power Driver Seat

To adjust a power driver seat,
if equipped:

Move the seat forward or
rearward by sliding the control
forward or rearward.

Raise or lower the front part of
the seat cushion by moving the
front of the control up or down.

Raise or lower the entire seat by
moving the rear of the control up
or down.

See

Power Seat Adjustment

To recline a power seatback,
if equipped:

Tilt the top of the control
rearward to recline.

Tilt the top of the control forward
to raise.

See

Reclining Seatbacks

Lumbar Adjustment

If equipped, press and hold the front
or rear of the control to increase or
decrease lumbar support.

See

Lumbar Adjustment

Summary of Contents for TERRAIN 2018

























































































































































































































































































































Search results

Summary of Contents for TERRAIN 2018

Reviews:

Related manuals for TERRAIN 2018

Brands by name

Popular brands

GMC TERRAIN 2018, Owner'S Manual

Search results

Summary of Contents for TERRAIN 2018

Reviews:

Related manuals for TERRAIN 2018

Brands by name

Popular brands