General Motors Tech2 User Guide
14
Mechanical Dimensions
The dimensions of the Tech2 are as follows:
• Width – 6.1 inches (155 mm)
• Height – 11.8 inches (300 mm)
• Depth – 2.0 inches (55 mm)
• Weight – 2.2 pounds (1.0 kg)
Environmental Specifications
CONDITIONS
SPECIFICATIONS
Temperature
Operating:
0 to 40°C (32 to 104°F )
Non-operating:
-40 to 70°C (-40 to 158°F )
Relative Humidity
Operating: 15 % to 95% at 40°C (non-condensing )
Non-operating:
90% at 65°C (non-condensing )
W arranty
The Tech2 is warranted against defects in materials and workmanship by the manufacturer
for 24 months beginning five days after the date of shipment to your service center.
If your Tech2 must be sent in for repair, contact Vetronix Corp. 1.800.321.4889, option 7.
Use the package that the replacement arrives in to return the defective unit. You can
contact the ACDelco Aftermarket Support Center at 1.888.212.8959 for the exact
exchange procedure. If notification of defect is received during the warranty period, the
part listed in figures I-2, I-3, I-4, or I-5 that is defective will be replaced. You must return the
defective unit as directed, or you will be charged for the replacement.
Important:
This warranty does not cover any part that has been abused, altered, used for
purpose other than which it was intended, or used in a manner inconsistent with
instructions regarding use. This includes, but is not limited to, removal of any Tech2
screws.
Summary of Contents for Tech2
