manualshive.com logo in svg

GMC SIERRA 2002, Manual

Share
Download
GMC SIERRA 2002 Manual Download Page 287

4-58

For example, adding a 700 lb. (318 kg) snow plow
actually adds more than 700 lb. (318 kg) to the
front axle. Using the formula, if the snow plow is
4 ft. (122 cm) in front of the front axle and the
wheel base is 10 ft. (305 cm), then:
W=700 lb. (318 kg)
A=4 ft. (122 cm)
W.B.=10 ft. (305 cm)

(W x (A + W.B.))/W.B.= (700 x (4 + 10))/10 = 
980 lb. (445 kg)

So, if your truck’s front axle reserve capacity is
more than 980 lb. (445 kg), you could add this
snow plow without exceeding the front GAWR.

Q:

What if I want to add heavier equipment to 
my vehicle?

A:

You can add heavier equipment on the front of the
vehicle if you compensate for it by carrying fewer
passengers, less cargo, or by positioning cargo more
towards the rear. This has the effect of reducing the
load on the front. However, the front GAWR, rear
GAWR and the GVWR must never be exceeded.

Summary of Contents for SIERRA 2002




















































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands