manualshive.com logo in svg

GMC SIERRA 2002, Manual

Share
Download
GMC SIERRA 2002 Manual Download Page 122

2-41

Shifting Out of PARK (P) 
(Automatic Transmission Only)

If your vehicle has an automatic transmission shift lock
control system, you have to fully apply your regular
brakes before you can shift from PARK (P) when the
ignition is in RUN. See “Automatic Transmission” in
the Index.

If you cannot shift out of PARK (P), ease pressure on
the shift lever and push the shift lever all the way up
into PARK (P) as you maintain brake application. Then,
move the shift lever into the gear you want.

If you ever hold the brake pedal down but still can’t
shift out of PARK (P), try this:

1. Turn the key to the OFF ignition position.

2. Apply and hold the brake until the end of Step 4.

3. Shift the vehicle to NEUTRAL (N).

4. Start the vehicle and then shift to the drive gear 

you want.

5. Have the system fixed as soon as you can.

Parking Your Vehicle 
(Manual Transmission Models Only)

CAUTION:

Shifting the transfer case to NEUTRAL can
cause your vehicle to roll even if the manual
transmission is in gear. You or someone else could
be seriously injured. Be sure to set the parking
brake before placing the transfer case in
NEUTRAL. See “Parking Brake” in the Index.

Before you get out of your vehicle, move the shift lever
into REVERSE (R), and firmly apply the parking brake.
Once the shift lever has been placed into REVERSE (R)
with the clutch pedal pressed in, you can turn the
ignition key to OFF, remove the key and release 
the clutch.

If you are parking on a hill, or if you are pulling a
trailer, see “Towing a Trailer” in the Index.

Summary of Contents for SIERRA 2002




















































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands