manualshive.com logo in svg

GMC SIERRA 2002, Manual

Share
Download
GMC SIERRA 2002 Manual Download Page 197

2-116

Trans Fluid Hot

If you have an automatic transmission, you have a
transmission temperature warning display contained in
the message center.

If the transmission 
fluid temperature becomes
high, the message will 
be displayed.

When the transmission enters the protection mode you
may notice a change in the transmission shifting
patterns. When the transmission fluid temperature
returns to normal, the display will turn off and the
transmission shifting patterns will return to normal.

NOTICE:

If you keep driving your vehicle with the
transmission TRANS FLUID HOT message
displayed, you can damage the transmission. 
This could lead to costly repairs that may not be
covered under your warranty.

The following situations can cause the transmission to
operate at higher temperatures:
D Towing a trailer
D Hot outside air temperatures
D Hauling a large or heavy load
D Low transmission fluid level
D High transmission fluid level
D Restricted air flow to the radiator and the auxiliary

transmission oil cooler (if equipped).

A temporary solution to hotter transmission operating
temperatures may be to let the transmission cool down.
If the transmission is operated at higher temperatures on
a frequent basis, see “Scheduled Maintenance” in the
Index for the proper transmission maintenance intervals.

Summary of Contents for SIERRA 2002




















































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands